NINE-MILE COUNTY FOREST RECREATION
Difficulty: Beginner to Expert Length: 20 miles (33 km); loops from .5 mile to 9.6 miles Grooming: Frequently groomed 8' wide skating lane and machine set double tracks on all trails.
WAX RECOMMENDATION
American Birkebeiner
WAX RECOMMENDATION
American Birkebeiner
Cable to Hayward, WI
Saturday February 24
51K Skate or Classic
Race Start 8:20AM and on
Forecast/Conditions: Low of around 20F Friday night with
highs of around 33F Saturday. Expect dirty granular snow that
might be covered with a layer of fresh snow.
Chance of snow Friday and race day!
Glidewax: Beginning with a clean base, apply
Dibloc LF Moly, scrape and
brush, then apply
Dibloc HF Red/
HF Moly, mixed 1:1, scrape and brush.
Finish by ironing in JetStream Moly, and polishing well with a
dedicated nylon polishing brush, followed by a final polish with a
Thermopad.
HelX Cold would make an excellent alternative to
JetStream.
Gripwax: See any TOKO Representative found at the Expo
Structure: A universal stonegrind, or two passes using the
Course(offset or linear) wheel of a
TOKO Structurite tool (before
applying HF RED/HF Moly layer) will best suit these conditions.
Check the Waxtip page at www.TokoUS.com before all of your races for the latest waxing information.
The Toko Race Wax Tips offer racers precise waxing advice on how to make your skis perform optimally for a given
event. For racers who don’t have top end waxes available, skip the Fluorocarbon (HelX, JetStream) and substitute the
LF or
System 3 wax of the same color (Yellow, Red, Blue). Additionally, for those who do not have a
rotocork (for
applying JetStream), this step can be replaced by vigorously corking with a dedicated Plasto Cork as the expense of durability.
WAX RECOMMENDATION
North End Classic
North End Trailhead, Cable, WI
Sunday February 11
20K Classic
Race Start 10AM
Forecast/Conditions:
Friday-overnight - low -11F
Saturday-daytime - high temperatures near 11F
Glidewax: Apply
Dibloc LF Moly/
LF Blue,, mixed 1:1, scrape and brush
then apply
TOKO Dibloc HF Blue, scrape and brush, then apply LF Blue/XCold
Powder, mixed, scrape and brush out well.
Gripwax: Roughen grip zone with 180 grit sandpaper. Apply Base
Green, iron, and smoothen with cork while still warm. Apply 2-3layers
Carbon Mint thoroughly corking each layer.
Structure: A fine stonegrind will best suit these conditions.
Check the Waxtip page at TokoUS.com before all of your races for the latest waxing information.
The Toko Race Wax Tips offer racers precise waxing advice on how to make your skis perform optimally for a given event. For racers who don’t have top end waxes available, skip the Fluorocarbon (HelX, JetStream) and substitute the LF or System 3 wax of the same color (Yellow, Red, Blue). Additionally, for those who do not have a rotocork (for applying JetStream), this step can be replaced by vigorously corking with a dedicated Plasto Cork as the expense of durability.
WAX RECOMMENDATION
WI High School State Championships
Northwoods Golf Course, Rhinelander, WI
Sunday February 11
7K Skate
Forecast/Conditions: Expect a crusty/icy base covered with
possible cold sugar snow. Friday night low of -5F, with a Saturday
high of 10F
Glidewax: Apply
Dibloc LF Moly/
LF Blue,, mixed 1:1, scrape and brush
then apply
TOKO Dibloc HF Blue, scrape and brush, then apply LF Blue/XCold
Powder, mixed, scrape and brush out well.
Gripwax: Roughen grip zone with 180 grit sandpaper. Apply Base
Green, iron, and smoothen with cork while still warm. Apply 2-3
layers Carbon Mint thoroughly corking each layer. For those who
need more grip, substitute Carbon White.
Structure: A fine stonegrind will best suit these conditions.
Check the Waxtip page at TokoUS.com before all of your races for the latest waxing information.
The Toko Race Wax Tips offer racers precise waxing advice on how to make your skis perform optimally for a given event. For racers who don’t have top end waxes available, skip the Fluorocarbon (HelX, JetStream) and substitute the LF or System 3 wax of the same color (Yellow, Red, Blue). Additionally, for those who do not have a rotocork (for applying JetStream), this step can be replaced by vigorously corking with a dedicated Plasto Cork as the expense of durability.